Maintenance
Last updated
Last updated
This visual guide is perfect for doing a quick check that all bolts are tight during regular maintenance or to find the correct bolt if one is missing. We recommend doing this periodically during practice and after every match at events. Use this guide top help keep your X2 Swerve Modules in peak performance.
Printable PDF versions of the Bolt Checklist are found below.
These are some tips and tricks to keep the product running without a hitch. Failure to do maintenance may result in issues.
First Time Assembly
Loctite all bolts
Grease all gears
We recommend a dry grease or white lithium for all hex bore gears
We recommend Red n Tacky for the bevel gears
All bolts are tight and there are no gaps in the assembly
Gears mess correctly and everything spins smoothly
General Maintenance
Check for excessive wear in gears
Reapply grease
Verify everything still spins smoothly
No damage to printed parts
Yearly Maintenance
Disassemble gearbox
Replace all gears, if aluminum gears were used
Clean all components
Inspect all components for wear or damage
Reassemble with new bolts with Loctite and grease all gears
