Thin (Right)
Last updated
Last updated
Assembly instructions are interchangeable between the Corner and Tube Mount versions of the Swerve.
Blue Loctite (McMaster P/N ) is recommended on all bolts that thread into a tapped hole.
Check for any remaining support material on all 3D printed parts before assembly.
See Rotation and Drive Motor locations below.
A 12t pinion is the largest size that can be used in this configuration to avoid collisions.
%2C%20Tube%20Mount.svg?alt=media&token=67a5eb8a-d0f2-46a8-a0db-892812ee7560)
%2C%20Corner%20Mount.svg?alt=media&token=72fdf9e5-c0f0-4499-9317-8e9e173313ee)
%20-%20Planning%20Ahead%202.svg?alt=media&token=b70e17e7-1187-4958-8ea7-536ec10ffd58)