Getting Started
Assembly Prep
Refer back to the Individual Components page to ensure that all necessary parts are located before starting assembly steps.
Tools Required For Assembly
These tools are required for the assembly of the WCP Swerve X2.
Snap ring pliers (3/8")
Allen keys
1/8"
5/32"
3/16"
Optional tools that may be needed:
Arbor press or deadblow hammer
Vibra-TITE VC-3 Threadmate (Vibra-TITE) is recommended on all bolts that thread into a tapped hole.
Key Assembly Instructions
The following pages cover the basic assembly instructions for the WCP Swerve X2.
Apply Lucas Red "N" Tacky grease to all gears after final assembly to ensure smooth operation and reduce wear during use.
Last updated