Steps 13-16
Last updated
Last updated
Slide the Bottom and Top Cup Holder into position. Mount the Holders using a total of eight #10-32 x 3/8"L bolts and secure with #10-32 nuts.
Ensure that the bolts go through the Driver Station Holder AND the Cup Holder.
Install the tube handle with the included 1/4"-20 bolt and black round washers. Add the remainder of the #10-32 x 3/8"L bolts into the Driver Station Holders during this step.
The included Tube Nuts need to be pressed in before installation process.
Install the Driver Station Front Rail with six #10-32 x 3/8"L bolts and secure with #10-32 nuts.
Place driver station on top and install the small Driver Station Holders in the appropriate locations. Use two #10-32 x 3/8"L bolts as shown below and secure with #10-32 nuts.
Velcro can be added during this step to prevent movement.
The picture below is only used for a mounting reference.
