LogoLogo
FRC Build System
  • Overview and Features
    • General Specs
  • General Info
    • Kit Contents
      • Complete Kit
      • Individual Components
    • Customization
  • Assembly Instructions
    • Getting Started
    • Single Upper Kit
      • Steps 1-4
      • Steps 5-8
    • Battery Rack Kit
      • Steps 1-5
      • Steps 6-9
    • Corner Case Kit
    • Table Kit
      • Steps 1-4
      • Steps 5-9
    • Toolbox Kit
    • SuperCart
      • Steps 1-4
      • Steps 5-8
      • Steps 9-12
      • Steps 13-16
    • SuperStation
  • Misc
    • FAQ & Trouble Shooting
    • Changelog
Powered by GitBook
On this page
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
Export as PDF
  1. Assembly Instructions
  2. Battery Rack Kit

Steps 1-5

PreviousBattery Rack KitNextSteps 6-9

Last updated 10 months ago

Step 1

The installation of the Snap-in Nuts into the Horizontal Rails will be demonstrated below.

Insert the Snap-in Nuts into the corresponding slots.

Repeat this step for the second Bottom Battery Horizontal Rail

Insert the Snap-in Nuts into the corresponding slots.

Repeat this step for the second Middle Battery Horizontal Rail

Insert the Snap-in Nuts into the corresponding slots.

Repeat this step for the second Top Battery Horizontal Rail

Step 2

The installation of the Snap-in Nuts into the Vertical Rails will be demonstrated below.

Insert the Snap-in Nuts into the corresponding slots.

Repeat this step for the second Battery Vertical Rail (Right)

Insert the Snap-in Nuts into the corresponding slots.

Repeat this step for the other three Battery Vertical Rails (Middle)

The reference picture above shows the installation of half of the Snap-in Nuts that are needed. The picture below shows the finished product.

Insert the Snap-in Nuts into the corresponding slots.

Repeat this step for the second Battery Vertical Rail (Left)

Step 3

Take the Bottom Battery Horizontal Rail and the Battery Horizontal Rail (Middle) from Step 1, along with two of the Battery Vertical Rail (Middle) from Step 2 and bolt them together using #10-32 x .500" L bolts into the snap nuts.

Repeat this step for the other half of the Battery Rack.

Step 4

Take the assembly from Step 3 along with the Battery Vertical Rail (Right) and Battery Vertical Rail (Left) and bolt them together using #10-32 x .500" L bolts into the snap nuts.

Repeat this step for the other half of the Battery Rack.

Step 5

Take the assembly from Step 4 along with the Top Battery Horizontal Rail and bolt them together using c bolts into the snap nuts.

Repeat this step for the other half of the Battery Rack.