LogoLogo
FRC Build System
  • Overview and Features
    • General Specs
    • Zeroing Module
  • General Info
    • Kit Contents
      • Complete Kits
      • Individual Components
      • Ratio Kits
    • Ratio Options
  • Assembly Instructions
    • Getting Started
    • Steps 1-4
    • Steps 5-8
    • Steps 9-11
    • Step 12-13
    • Wheel Tread Cutting
  • Applications
    • Mounting
  • Misc
    • Maintenance
    • FAQ & Trouble Shooting
    • Changelog
Powered by GitBook
On this page
Export as PDF
  1. Overview and Features

Zeroing Module

PreviousGeneral SpecsNextKit Contents

Last updated 10 months ago

The Swerve XS has two sets of tapped holes in the bottom plate that are used to mount the Zeroing Block onto the module. This will help align the wheel to the module so that a zero can be set in code.

The image below shows the two available mounting holes for the zeroing block.

Block Installation

To align the wheel, determine the correct set of holes to use for the desired direction. Manually align the wheel and then use a #10-32 x 1.5”L bolt in each of the two holes for the final alignment. Lightly tighten the bolt while gently turning the module to get the perfect alignment with the wheel module forks. Once the position is calibrated, remove the bolts.

56KB
Zeroing Block.STEP