Wheel Tread Cutting

When bolting the tread to the Swerve X Wheel, use four 1/2" length #10-32 Bolts for assembly.

If you are cutting your own tread, you can use the Tread Pattern shown below.

3 Ply Black Neoprene tread was used to determine the overall length and hole spacing for the tread pattern. If using a different tread type, the spacing may be different due to the construction of the tread.

PreviousStep 12-14 NextMounting

Last updated 11 months ago

When bolting the tread to the Swerve X Wheel, use four 1/2" length #10-32 Bolts for assembly.

If you are cutting your own tread, you can use the Tread Pattern shown below.

3 Ply Black Neoprene tread was used to determine the overall length and hole spacing for the tread pattern. If using a different tread type, the spacing may be different due to the construction of the tread.