LogoLogo
FRC Build System
  • Overview and Features
    • Basic Features
    • Advanced Features
    • General Specs
    • Zeroing Module
  • General Info
    • Kit Contents
      • Complete Kits
      • Individual Components
      • Ratio Kits
    • Ratio Options
    • Configurations
  • Maintenance
  • Assembly Instructions
    • Getting Started
    • Standard (ThroughBore)
      • Steps 1-4
      • Steps 5-8
      • Steps 9-14
    • Standard (CANcoder)
      • Steps 1-4
      • Steps 5-8
      • Steps 9-15
    • Thin (ThroughBore)
      • Steps 1-4
      • Steps 5-8
      • Steps 9-12
      • Steps 13-17
    • Thin (CANcoder)
      • Steps 1-4
      • Steps 5-8
      • Steps 9-12
      • Steps 13-18
    • Wheel Assembly
      • Aluminum Wheel
      • Molded Wheel (High Grip)
      • Molded Wheel (Smooth)
  • Misc
    • FAQ & Trouble Shooting
    • Changelog
Powered by GitBook
On this page
Export as PDF
  1. Assembly Instructions
  2. Wheel Assembly

Molded Wheel (High Grip)

PreviousAluminum WheelNextMolded Wheel (Smooth)

Last updated 11 days ago

Vibra-TITE VC-3 Threadmate () is recommended on all bolts that thread into a tapped hole.

Slide the desired Molded Tread onto one half of the Molded Wheel Hub. Align holes in both halves of hubs and press second half into place.

Insert the 45T Bevel Gear and attach with #10-32 x 1"L SHCS bolts. Use these bolts to squeeze both halves of the hub together. Ensure no gaps are left after tightening bolts.

Be sure to align the bolt holes in the Molded Swerve Wheel with the tapped holes in the 45T Bevel Gear.

Ensure that the 45T Bevel Gear is fully seated before installation. Failure to do so will not allow the wheel to spin smoothly.

Vibra-TITE