Bearing Blocks

The Clamping Elevator Blocks (WCP-0323) can be assembled with bearings before assembly of the Elevator.

Half of all blocks blocks should be assembled without the 1/4" ID radial bearings as these would need to be removed and reinstalled in certain steps of assembly.

Step 1

The Clamping Elevator Blocks (WCP-0323) can be assembled in their high strength configuration with one 6mm Round x 4mm L Shoulder Bolt (WCP-0574) and two 6mm ID x 12mm OD Radial Bearings (WCP-0498) as shown in the image below.