Limelight Mount
Last updated
Last updated
The following details the assembly instructions for the Limelight. The Limelight provides the shooter with vision tracking, and can be used in tandem with the GreyT Turret (11” ID) to greatly increase the accuracy of the overall system.
Center the Limelight Mount between the Shooter Side Plates. Secure the Limelight Mount to the two top most standoffs using four #10-32 x 1”L bolts and nuts.
Do not over tighten the bolts as this will cause the plates to bend.
Attach the Limelight to the Limelight mount using four #10-32 x 2”L bolts and nuts.
The bolts need only be tightened so that the Limelight is not loose on the plate. Over tightening the bolts may cause damage to the case or the electronics inside.
