LogoLogo
FRC Build System
  • Overview and Features
  • General Info
    • Individual Components
  • Assembly Instructions
    • Getting Started
    • Shooter Base
      • Steps 1-4
      • Steps 5-8
    • 775pro Belt Drive
    • 775pro VersaPlanetary Drive
    • Falcon 500 Belt Drive
    • Falcon 500 Direct Drive
    • Falcon 500 VersaPlanetary Drive
  • Applications
    • 2020 WCP CC
  • Misc
    • FAQ & Trouble Shooting
    • Changelog
Powered by GitBook
On this page
  • Step 1
  • Step 2
  • Step 3
Export as PDF
  1. Assembly Instructions

775pro Belt Drive

PreviousSteps 5-8Next775pro VersaPlanetary Drive

Last updated 1 year ago

The following instructions detail how to assemble the 775pro Belt Drive configuration.

Step 1

Slide ThunderHex through bearing on one side of shooter assembly. Install remaining components as the shaft is slid through to the other side.

Leave the collars loose until all components have been installed.

Step 2

Press the 12t pinion onto the 775pro motor before installation.

The 775pro aligns with the hole further from the bearing hole.

Use two M4 bolts to secure motor. Install motor on opposite side as well.

Center the solid roller wheels and tighten all shaft collars.

Leave collars loose until the bolts for the motors are installed. Being able to slide the wheels will help with installing the motor bolts.

Step 3

Install the Hex Bore Mag Encoder Housing on the ThunderHex shaft and secure with a 1/2” hex collar.

Other encoders may be used. This is the simplest and easiest encoder mounting option.