Configurations

The WCP Stub Rollers can be used with both 1-1/8" ID Aluminum Round Tube Stock and SplineXL Tube Stock. Use the images below for material preparation and compatibility information.

Compatibility Chart

Cut Guides

For both the Round Tube and SplineXL Tubes, a #9 hole will need to be drilled 0.500" from each end that will have the Stub Roller. Use the pictures below for a detailed view.

Round Tube

The 1-1/8" Round ID Stub Rollers have four holes in which the #10-32 x 1/4"L bolts can be used.

The #9 holes should be drilled as highlighted in green.

SplineXL Tube

The SplineXL ID Stub Rollers only have two holes in which the #10-32 x 1/4"L bolts can be used.

The #9 holes should be drilled on the flats of the SplineXL Tube as highlighted in green.