LogoLogo
FRC Build System
  • Overview and Features
  • General Info
    • Individual Components
  • Assembly Instructions
    • Getting Started
    • OMIO CNC Router Stand (Mobile Cart)
      • Steps 1-4
      • Steps 5-8
      • Steps 9-13
      • Leveling The Router Stand
    • Installing OMIO X8 CNC Router
    • OMIO CNC Router Enclosure (Base)
      • Steps 1-4
      • Steps 5-8
      • Steps 9-12
    • Installing Router Enclosure
  • Misc
    • FAQ & Trouble Shooting
    • Changelog
Powered by GitBook
On this page
Export as PDF
  1. Assembly Instructions
  2. OMIO CNC Router Stand (Mobile Cart)

Leveling The Router Stand

PreviousSteps 9-13NextInstalling OMIO X8 CNC Router

Last updated 11 months ago

After moving the Router Stand to desired location, the Router Stand can be locked into place to prevent movement and can be leveled as well. The leveling process does not require precision and is mainly to prevent the Router Stand from rocking as the machine is operated.

To prevent movement, rotate the red knob located inside the caster. This knob will lower or raise pad in the caster. Lower the pad till the wheel is lifted off the ground. Repeat this step will the remaining casters. Ensure that each pad is touching the ground.