Mounting Kraken X60
Last updated
Last updated
The Kraken X60 has eleven #10-32 mounting holes on a 2" bolt circle, spaced 30 degrees apart. Allowing the Kraken to mount on the traditional 2-hole CIM mounting pattern, as well as applications that use the 6 and 8 hole patterns of the Falcon and NEO.
The blind mounting holes are 0.250" deep, meaning they don't go through the mounting plate. By using blind mounting holes, teams cannot lock the motor's internal rotor by using too long of a screw.
The table below shows the appropriate bolt length that should be used when mounting the Kraken X60.
0.0625"
0.250"
0.125"
0.375"
0.250"
0.500"
