Mounting Examples
Last updated
Last updated
The WCP Elevator Block is compatible with the 2x1 Aluminum Tube Plug (). This is ideal for the corners of an elevator carriage or the bottom tube connections for any intermediate elevator stages.
The Aluminum Tube Plug and Elevator Block must be bolted together before step two. The #10-32 x 3/4”L Bolts will sit in the 3/8” ID pocket underneath the Dowel Pin.
The WCP Clamping Block is compatible with the 2x1 Tubing.
The Bearing Block must be bolted together using a bolt from each side using two #10-32 x 2.5”L Bolts.
The #10-32 x 1.5”L Bolts will sit in the pockets on top of the Dowel Pin.
The WCP Inline Clamping Bearing Block is compatible with the 2x1 Aluminum Tube Plug (). This is ideal for the corners of an elevator carriage or the bottom tube connections for any intermediate elevator stages.
