Clamping Block

Assembly Instructions

The following page shows the General Assembly Instructions for the Clamping Block.

Blue Loctite (McMaster P/N 1004A12) is recommended on all bolts that thread into a tapped hole.

Bolt the bearing stack-up to the block as shown in the image below.

Last updated 9 months ago

The following page shows the General Assembly Instructions for the Clamping Block.

Blue Loctite (McMaster P/N 1004A12) is recommended on all bolts that thread into a tapped hole.

Bolt the bearing stack-up to the block as shown in the image below.