Physical Specifications
Last updated
Last updated
The Kraken X44 is designed to be a drop in lower power replacement for a Kraken X44. This means the lower weight, lower power but similar rpm.
Diameter
44mm / 1.73in
Effective Diameter w/ Bump
47.4mm / 1.866in
What is the bump?
The bump is where the internal motor's stator wires are routed to the back of the motor. This feature was added to allow there to be enough clearance so the wires couldn't contact the motor's rotor.
The length of the Kraken X44 depends on the version.
WCP-0941
Kraken X44 + Talon FX
75mm / 2.96"
The weight of the Kraken X44 depends on version.
WCP-0941
Kraken X44 + Talon FX
0.75 lbs
Kraken X44 has (11x) #10-32 mounting holes on a 1.375" bolt circle, spaced 30 degrees apart.
Each mounting hole is blind, meaning it doesn't go through the mounting plate. By using blind mounting holes, teams cannot lock the motor's internal rotor by using too long of a screw.
The Kraken X44 also has the same 3/4" diameter pilot boss that the KrakenX60/CIM/MiniCIM/NEO/Falcon has.
