Mounting Kraken X44

The Kraken X44 has eleven #10-32 mounting holes on a 1.375" bolt circle, spaced 30 degrees apart.

Mounting Holes

The blind mounting holes are 0.250" deep, meaning they don't go through the mounting plate. By using blind mounting holes, teams cannot lock the motor's internal rotor by using too long of a screw.

The additional mounting holes give teams the ability to change the direction of the wires.

Mounting Example

The table below shows the appropriate bolt length that should be used when mounting the Kraken X44.

Material Thickness	Recommended Bolt Length
0.0625"	0.250"
0.125"	0.375"
0.250"	0.500"