The 2" pitch spacing is widely compatible with a variety of products, making it easier for FRC teams to design and build their robots. Allowing for standard #10-32 hardware to be used.
This configuration allows teams to opt for 1" From Center gears for lightweight or high-speed gearboxes, prioritizing weight and size reduction.
Because of the 2" width of the block, the slot is open ended.
The highlighted holes allow for a #10-32 bolt and 3/8" OD spacer to be used with either 1" or 2" tubing with out creating any collisions.
The 2" pitch spacing is widely compatible with a variety of products, making it easier for FRC teams to design and build their robots. Allowing for standard #10-32 hardware to be used.
This configuration allows teams to opt for 1" From Center gears for lightweight or high-speed gearboxes, prioritizing weight and size reduction.
The highlighted holes allow for a #10-32 bolt and 3/8" OD spacer to be used with either 1" or 2" tubing with out creating any collisions.
The 2.5" wide clamping bearing blocks are compatible with the WCP Cam (WCP-0882) in the 2" tall tube configuration, while all clamping bearing blocks are compatible with the Cam in the 1" tall tube configuration.
Minimum Cam Center Distance
Maximum Cam Center Distance
The Clamping Bearing Blocks can be used to make basic gear trains by stacking the blocks next to each other on any 2" tall tube.
The gear teeth for a center distance is calculated by adding the tooth count of both gears together. [Ex: 40 + 40 = 80]
The gear teeth for a center distance is calculated by adding the tooth count of both gears together. [Ex: 40 + 50 = 90]
The gear teeth for a center distance is calculated by adding the tooth count of both gears together. [Ex: 50 + 50 = 100]
All Clamping Bearing Blocks are compatible with parts that have the .