Mount the Caster onto the Caster support using the bolts and nuts included.
Repeat this for the remaining Casters.
Install the Caster Supports to the Cart Pan using ten #10-32 x 3/8"L bolts per support. Fully secure them with #10-32 nuts.
Install the Battery Holder to the Cart Pan using six #10-32 x 3/8"L bolts. Secure them with #10-32 nuts.
Install the Driver Station Holders using two #10-32 x 3/8"L bolts and secure them with #10-32 nuts.
The following sections will have all necessary information for the assembly of the SuperCart.
Install #10-32 x 3/8"L bolts into the top of the Left and Right Rails securing into the front rail. Secure them with #10-32 nuts.
Install the Back Rail using four #10-32 x 3/8"L bolts, secure loosely with #10-32 nuts.
These bolts will be tightened in the next step.
Install the Left and Right Handle rails using six #10-32 x 3/8"L bolts and secure them with #10-32 nuts.
The bolts installed during Step 6 should now be fully secured.
Install the Left and Right Gusset using eight #10-32 x 3/8"L bolts and secure them with #10-32 nuts.
Slide the Bottom and Top Cup Holder into position. Mount the Holders using a total of eight #10-32 x 3/8"L bolts and secure with #10-32 nuts.
Ensure that the bolts go through the Driver Station Holder AND the Cup Holder.
Install the tube handle with the included 1/4"-20 bolt and black round washers. Add the remainder of the #10-32 x 3/8"L bolts into the Driver Station Holders during this step.
The included Tube Nuts need to be pressed in before installation process.
Install the Driver Station Front Rail with six #10-32 x 3/8"L bolts and secure with #10-32 nuts.
Place driver station on top and install the small Driver Station Holders in the appropriate locations. Use two #10-32 x 3/8"L bolts as shown below and secure with #10-32 nuts.
Velcro can be added during this step to prevent movement.
The picture below is only used for a mounting reference.
Install three of the Vertical Rails onto the cart pan. Use #10-32 x 3/8"L bolts and secure them with #10-32 nuts on the pan's interior
Install the two Corner Support Rails onto the cart pan. Use #10-32 x 3/8"L bolts and secure them with #10-32 nuts on the pan's interior.
Install the Front Rail onto the assembly from Step 2. Use four #10-32 x 3/8"L bolts and secure them with #10-32 nuts on the pan's interior.
Do not fully tighten the bolts in this step.
The left and right rails will have to slide directly next to the front rail.
Install the Left and Right Rails with four #10-32 x 3/8"L bolts on each rail and secure them with #10-32 nuts.
The Front Rail bolts from Step 3 should be tightened during this step. All bolts should now be secured.
