LogoLogo
FRC Build System
  • Overview and Features
  • General Info
    • Individual Components
    • Width and Diameter at Set Pressures
  • Assembly Instructions
    • Getting Started
      • 6" Wheels
      • 8" Wheels
  • Misc
    • FAQ & Trouble Shooting
    • Changelog
Powered by GitBook
On this page
  • Assembly Prep
  • Pneumatic Wheel Assembly Instructions
Export as PDF
  1. Assembly Instructions

Getting Started

PreviousWidth and Diameter at Set PressuresNext6" Wheels

Last updated 10 months ago

Assembly Prep

Refer back to the page and ensure that all necessary parts are located before starting assembly steps.

Tools Required For Assembly

These tools are required for the assembly of the Pneumatic Wheel.

  • SAE/Inch Allen Set

Optional tools that may be needed:

  • Simple Green or other soapy water solution

Pneumatic Wheel Assembly Instructions

Blue Loctite ) is recommended on all bolts that thread into a tapped hole.

Individual Components
(McMaster P/N 1004A12
Cover

6" Wheels

Cover

8" Wheels