Individual Components
OMIO CNC Tube Fixture (WCP-0347)
All OMIO CNC Tube Fixtures are tested for straightness on two machines before being send out. All jigs will have a straightness of +-0.0025”. The OMIO CNC Tube Fixture are not clamped down so as to not influence the straightness of the jig due to bolting down.
| Part Number | Description | QTY |
|---|---|---|
WCP-0347-001 | OMIO CNC Tube Fixture Base | 1 |
WCP-0347-002 | OMIO CNC Tube Fixture End Stop | 1 |
WCP-0348 | OMIO CNC Nut Strip | 2 |
~ | Mitee Bite Clamps (10204) | 3 |
~ | 1/4”-20 x 3/4”L Bolts | 9 |
79KB
WCP-0347 - KitContents.pdf
pdf
Recommended Parts To Buy
| Part Number | Description | QTY |
|---|---|---|
OMIO CNC Tube Fixture Clamps (5-Pack) | 1 | |
OMIO CNC Nut Strip (2-Pack) | 1 |
Find Our OMIO Page Here
Last updated