Getting Started

Assembly Prep

Refer back to the Complete Kit and Individual Components pages to ensure that all necessary parts are located before starting assembly steps.

Tools Required For Assembly

These tools are required for the assembly of the GreyT Turret (11in ID).

  • 7/16” Wrench

  • SAE/Inch Allen Set

GreyT Turret (11” ID) Assembly Instructions

The following covers the basic assembly instructions for the GreyT Turret (11” ID).

Blue Loctite (McMaster P/N 1004A12) is recommended on all bolts that thread into a tapped hole.

PreviousIndividual ComponentsNextStep 1-4

Last updated