Cone Bumper Mount (WCP-1109)

Cone Bumper Mount Bracket (WCP-1576)

Bracket Specifications

The overall Bracket length can be cut down as needed for a successful mounting experience.

Mount Spacing

When installing multiple bumper mounts on the same tube, any spacing can be used following the 0.50" hole spacing for more mounting flexibility.

The Brackets will sit 0.125" outside of the frame perimeter as shown below.

The Cone Bumper Mounts allow teams to easily detach and reattach their bumpers. No more fumbling during inspections, repairs, or those last-minute modifications. Crafted from high-quality materials and designed to withstand the rigors of the arena. These lightweight mounts seamlessly integrates with your robot, saving valuable weight while maximizing durability. Ensuring your bumpers stay firmly in place during even the most intense robot battles.

Notable Features

• Lightweight

• Quick Installation

• Compatible with 3/8" Wrench

Manual Updates

Product Updates

Common Questions

Q: How much spacing should be left between bumper mounts?

A: The Cone Bumper Mounts are designed to be installed where needed, allowing for custom spacing to guarantee a seamless integration.

Q: Can the Bracket length be modified?

A: The Mounting Bracket can be cut down as needed for the perfect mounting location.

Common Issues

Issue: Bumpers not being fully secured.

Possible Solution:

• Ensure that the Bumper Bracket is sitting flat on the tube and the Knob is fully tightened.

The following images will show an example drivetrain using the full 6"L Bumper Mounts along with modified Bumper Mounts.

Bumper Styles

The following sections show the mounts positioned in the recommended areas for different style bumpers.

Full Wrap Bumpers

For optimal bumper stability, we recommend for the utilize at least one bumper mount per side and at each bumper end as shown below

Corner Bumpers

For optimal bumper stability, utilize at least two Bumper Mounts per corner as shown.

The Bracket used in the following pictures below is shown without the bumpers attached as a reference only.

Step 1

Use the Bracket to line up the mounting holes needed for the Bumper Cones and securely fasten it onto the #10-32 x 3"L SHCS bolt. The Bumper Cones should sit flat on the mounting tube used.

Step 2

In order to secure the Bumpers, simply fasten the Knob using a 3/8" wrench.