LogoLogo
FRC Build System
  • Overview and Features
  • General Info
    • Individual Components
    • Configurations
  • Assembly Instructions
    • Getting Started
    • Battery Mount (Vertical) Assembly
  • Applications
    • Mounting the SB50 Connector
  • Misc
    • Changelog
Powered by GitBook
On this page
Export as PDF
  1. Applications

Mounting the SB50 Connector

PreviousBattery Mount (Vertical) AssemblyNextChangelog

Last updated 10 months ago

The SB50 can be mounted with a #6-32 bolt and nut or by tapping the SB50 to #8-32 and using a bolt. The SB50 that comes from the battery can then be secured with the second hole in a variety of ways. Teams can use their preferred method:

• Top most hole that a thumbscrew (tap the SB50) can be installed in • Run a zip tie through the hole around the connector from the battery • Run a large zip tie through the cutout for the strap and around both SB50’s