1.5" C-C Gearbox Assembly
Step 1
Press the bearing into the clearance plate. This should be a light press it. The bearing flange should sit on the side shown below.
Step 2
Press the bearing into the clearance plate. This should be a light press it. The bearing flange should sit on the side shown below.
Step 3
Attach the motor spacer onto the Kraken X60 motor using #10-32 x 1/2”L bolts and secure the Drive Pinion using the #10-32 x 1/4"L Pan Head Bolt.
Step 4
Mount the assembly from Step 3 onto the Motor Plate from Step 1 using the two #10-32 x 7/8"L bolts.
Step 5
Slide the desired gear and shaft into place. Bolt everything together using four #10-32 x 1"L bolts and 5/8"L spacers.
Last updated