Standard Wire Nuts
Last updated
Last updated
These Standard Wire Nuts are ideal for when you need to splice between 2 and 5 wires together. The instructions for use are the same across all styles. Listed in the table below are the specifications for the Standard Wire Nuts.
To use the Standard Wire Nuts, first strip the desired number of wires to 10mm (or roughly 3/8”) and twist the exposed wire. Then lift the lever, insert the stripped ends of the wire, and lower the lever. Finally, give the wires a light tug to check that they are fully clamped by the Wire Nuts.
Wire Size
28-12AWG
Rated Voltage
400V
Rated Current
32A
Strip Length
3/8"
