# Configurations

The WCP Stub Rollers can be used with both 1-1/8" ID Aluminum Round Tube Stock and SplineXL Tube Stock. Use the images below for material preparation and compatibility information.

## Compatibility Chart

<figure><img src="/files/eUeOQeEZiuvkIESxHWb0" alt=""><figcaption></figcaption></figure>

## Cut Guides

For both the Round Tube and SplineXL Tubes, a #9 hole will need to be drilled 0.500" from each end that will have the Stub Roller. Use the pictures below for a detailed view.

{% tabs %}
{% tab title="Round Tube" %}
The 1-1/8" Round ID Stub Rollers have four holes in which the #10-32 x 1/4"L bolts can be used.

{% hint style="info" %}
The #9 holes should be drilled as highlighted in green.
{% endhint %}

<figure><img src="/files/SWtho9KJneRYF4Pwx7Of" alt=""><figcaption></figcaption></figure>
{% endtab %}

{% tab title="SplineXL Tube" %}
The SplineXL ID Stub Rollers only have two holes in which the #10-32 x 1/4"L bolts can be used.

{% hint style="info" %}
The #9 holes should be drilled on the flats of the SplineXL Tube as highlighted in green.
{% endhint %}

<figure><img src="/files/po5zgEpnA5qvwPiNKKyj" alt=""><figcaption></figcaption></figure>
{% endtab %}
{% endtabs %}


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.wcproducts.com/welcome/system-and-structure/wcp-stub-rollers/general-info/configurations.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.