# Single Pulley Assembly

Align the pin on one Single slice with the matching pocket on the other Single slice. Install the desired amount of #2-28 screws to hold the pulley slices together. Be sure to tighten the screws fully. There should be no gap between the pulleys when they are assembled.

{% hint style="info" %}
Note: Screws can be omitted if the slices are constrained by collars or snap rings.
{% endhint %}

{% hint style="info" %}
A piece of 1/2" OD Hex can be used to line up the parts during assembly.
{% endhint %}

<figure><img src="/files/Uq5yS6LhRiBZvBJB0LWF" alt="" width="563"><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.wcproducts.com/welcome/system-and-structure/polycord-pulleys/assembly-instructions/getting-started/single-pulley-assembly.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.