> For the complete documentation index, see [llms.txt](https://docs.wcproducts.com/welcome/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.wcproducts.com/welcome/system-and-structure/plastic-round-plugs/overview-and-features/basic-features.md).

# Basic Features

## Sized to Fit

Each plug is named by its outside diameter, which matches the inside diameter of the tube it goes into. For example, the 7/8" plug fits tube with a 0.875" ID. There is a plug size for every WCP carbon fiber round tube, and the same plugs also fit 1/16" wall aluminum and polycarbonate round tube with a matching ID.

{% hint style="info" %}
Refer to the [Compatibility Chart](https://docs.wcproducts.com/welcome/system-and-structure/plastic-round-plugs/general-info/compatibility-chart.md) to find the right plug for your tube.
{% endhint %}

## Threaded Insert Holes

Each plug has holes for #10-32 threaded inserts on its flat face and sides. The inserts on the flat face turn the end of the tube into a #10-32 mounting point, so brackets, plates, and other #10 hardware can bolt straight to the end of the tube. The side inserts let the plug be bolted into the tube through the tube wall instead of being epoxied in, as shown in the [Insert Only Installation](https://docs.wcproducts.com/welcome/system-and-structure/plastic-round-plugs/assembly-instructions/getting-started/insert-only-installation.md).

{% hint style="warning" %}
Threaded inserts are <mark style="color:$danger;">**NOT**</mark> included with the Plastic Round Plugs. Inserts must be purchased separately. Refer to the [Individual Components](https://docs.wcproducts.com/welcome/system-and-structure/plastic-round-plugs/general-info/individual-components.md) page for the inserts to buy.
{% endhint %}

<figure><img src="https://3585485516-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FxQ4jEGC9F5GCCKQ9maEn%2Fuploads%2FLwJdxiW7TvPRNTtJuQ29%2FCarbon%20Fiber%20Plugs%20-%20Insert%20Holes.svg?alt=media&#x26;token=90d858cb-8c83-47f4-8e6b-bdca371a735e" alt="" width="563"><figcaption></figcaption></figure>

### Side Insert Hole Locations

The center of each side insert hole is the same distance from the edge of the plug on every plug size, so the drawing below can be used to locate the #10 clearance holes that need to be drilled in the tube.

<figure><img src="https://3585485516-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FxQ4jEGC9F5GCCKQ9maEn%2Fuploads%2FadyaqLM7Lj5KbK89mpiq%2FCarbon%20Fiber%20Plugs%20-%20Side%20Insert%20Hole%20Location.svg?alt=media&#x26;token=26c935d1-d041-4bb1-8cbb-36ab4791c817" alt="" width="563"><figcaption></figcaption></figure>

## Epoxy Grooves

The outside of each plug is lined with grooves that hold epoxy during installation. As the plug slides into the tube, the grooves keep the epoxy from being scraped off and give it more surface to grip. Once the epoxy cures, it fills the grooves and locks the plug into the tube, creating a stronger bond than a smooth plug would.

{% hint style="info" %}
The epoxy grooves are used for the [Insert & Epoxy Installation](https://docs.wcproducts.com/welcome/system-and-structure/plastic-round-plugs/assembly-instructions/getting-started/insert-and-epoxy-installation.md). They are not needed for the [Insert Only Installation](https://docs.wcproducts.com/welcome/system-and-structure/plastic-round-plugs/assembly-instructions/getting-started/insert-only-installation.md).
{% endhint %}

<figure><img src="https://3585485516-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FxQ4jEGC9F5GCCKQ9maEn%2Fuploads%2F3FVO5B5HRqCeqfDopqyS%2FCarbon%20Fiber%20Plugs%20-%20Epoxy%20Grooves.svg?alt=media&#x26;token=94758916-21ac-4328-b7fb-3979b2bacbba" alt="" width="563"><figcaption></figcaption></figure>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.wcproducts.com/welcome/system-and-structure/plastic-round-plugs/overview-and-features/basic-features.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
