# 9mm Pulley Assembly

## Step 1

Combine the plastic pulleys by aligning the nubs on one slice with the matching pockets on the other. Once assembled, the two halves should sit flush with no visible gap between them, as shown in the section view below.

<div><figure><img src="/files/TH92VfjKV8t5DVcaOkg3" alt=""><figcaption><p>Exploded View</p></figcaption></figure> <figure><img src="/files/CYd94GCmHJjxHBeRy4cO" alt="" width="300"><figcaption><p>Section View</p></figcaption></figure></div>

## Step 2

Secure the slices by using the three included #2-28 x 3/8"L Thread Forming Screws.

<figure><img src="/files/0OB0Q0u3EzIShAy4l4wt" alt="" width="563"><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.wcproducts.com/welcome/system-and-structure/molded-pulleys/assembly-instructions/getting-started/9mm-pulley-assembly.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.