# Clamping Block

## Assembly Instructions

The following page shows the General Assembly Instructions for the Clamping Block. 

{% hint style="success" %}
Vibra-TITE VC-3 Threadmate ([Vibra-TITE](https://wcproducts.com/products/threadlocker)) is recommended on all bolts that thread into a tapped hole.
{% endhint %}

## Step 1

Bolt the bearing stack-up to the block as shown in the image below.

<figure><img src="https://3321970383-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FvpVKG4kVLnIlJUReyy4N%2Fuploads%2FS4cIB7HvarKCq0LCjW0D%2FClamping%20Block%20-%20Step%201.svg?alt=media&#x26;token=9a0555e0-46f9-44a4-b700-e0987124819b" alt="" width="563"><figcaption></figcaption></figure>