For the complete documentation index, see llms.txt. This page is also available as Markdown.
Battery Mount (Vertical) Assembly
Depending on the desired assembly method, there are two options for the bolts and spacers. Use the desired hardware for your application.
• Spacer Option - #10-32 x 2.5”L BHCS, #10-32 Nuts, and 2” Spacer
• Standoff Option - #10-32 x 1/2”L BHCS and 2” Threaded Hex Standoffs
The above components are sold separately from the Battery Mount (Vertical) WCP-0285.
Assemble all components in the desired locations. Below is just a recommendation for locations and components.
