Getting Started

Assembly Prep

Tools Required For Assembly

These tools are required for the assembly of the WCP Ballast Block.

• Allen Keys

  • 1/8"

Vibra-TITE VC-3 Threadmate (Vibra-TITE) is recommended on all bolts that thread into a tapped hole.

Key Assembly Instructions

The following section cover the basic assembly instructions for the WCP Ballast Blocks.

The Assembly Step below is only for reference and shows the maximum amount of bolts that can be used when stacking the blocks. When stacking the blocks it is necessary to take into account the bolt length and quantity used as this will affect the total weight that is being added.

Use #10-32 x 7/8"L bolts to mount the additional Ballast Block to the base block, as shown below. Repeat this process for each Ballast Block being stacked.

We recommend installing the bolts in the same orientation as shown below, as this simplifies future removal or addition of Ballast Blocks.