# Steps 6-9

## Step 6

Take the charger holders and battery holders and install SB50 or SB120 connectors using #10-32 x .750" L  bolts into the pem nuts. Use washer shims as needed to make the surface that the battery slides on smooth and flush.

Repeat this step for all of the charger holders and battery holders.

{% hint style="danger" %}
The Battery connectors are not included in the kit.
{% endhint %}

{% hint style="success" %}
If using the SB50 connector you will need to drill out the holes in the connector so a  #10-32 bolt can fit through.
{% endhint %}

<figure><img src="/files/k9GdFyyrvERbF9GvFLdj" alt="" width="563"><figcaption></figcaption></figure>

## Step 7

Install the battery holder from Step 6 onto the assemblies completed in Step 5 using #10-32 x .750" L Counter Sink bolts.

{% hint style="warning" %}
Leave the bottom two rows empty for the moment. We recommend not tightening everything fully yet.
{% endhint %}

<figure><img src="/files/x10t1tcY6Rbzdr6ovCzf" alt="" width="563"><figcaption></figcaption></figure>

## Step 8

Install assembly in case where desired using the #10-32 x .500"L Particleboard Screws.

{% hint style="info" %}
Make sure to add the #10-32 x .500"L Particleboard Screws onto the top portion of the Battery Rack and into the table top.
{% endhint %}

<figure><img src="/files/RjJWjpwHq9Ccuuc7kl6s" alt="" width="563"><figcaption></figcaption></figure>

## Step 9

Install the remaining charger holders and battery holders and then tighten everything down.

<figure><img src="/files/Ms9SJyQoPR6bfqM8UQuk" alt="" width="563"><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.wcproducts.com/welcome/shop-accessories/super-pit/misc/legacy-products/legacy-battery-rack-kit/steps-6-9.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.