For the complete documentation index, see llms.txt. This page is also available as Markdown.

Toolbox Kit

The following sections will have all necessary information for the assembly of the Super Pit Toolbox Kit.

The Corner Case Kit does not include the Toolbox.

Assembly

Step 1

Place the toolbox inside of the case and lay the Main Trim pieces into position. Secure the trim to the case and toolbox using the #10-32 x 1/2"L Particleboard Screws.

Step 2

Lay the Main Trim pieces into position. Secure the trim to the case and toolbox top using the #10-32 x 1/2"L Particleboard Screws.

Step 3

Secure the Light Shield pieces using the #10-32 x .500"L Particleboard Screws.

The Light Shield should not protrude outside of the case.

Last updated