Steps 1-4

Step 1

Install a 2" x 2" Tube Plug into each end of the Table Supports, secure them with #10-32 x 3/8"L bolts as shown below.

The Tube Plug may require light force to install. In such cases, a dead blow hammer or soft mallet can be used to gently seat the assembly into the tube.

Step 2

Install a 2" x 2" Tube Plug into each end of the Table Supports, secure them with #10-32 x 3/8"L bolts as shown below.

Step 3

Assemble the outer Table Pillars by attaching the Table Leg to the tubes from Step 1 using the provided #10-32 × 3/8" L bolts, as shown below.

Repeat this step to create the second outer Table Pillar.

Step 4

Assemble the center Table Pillar by attaching the Table Leg to the tubes from Step 2 using the provided #10-32 × 3/8" L bolts, as shown below.