# SuperStation
The following sections will have all necessary information for the assembly of the SuperStation.
## Step 1
Install the Main Rails onto the Driver Station Base using a total of ten #10-32 x 3/8"L bolts and secure them using #10-32 nuts.
## Step 2
Attach the Laptop Plate to the Main Rails in your desired location using four #10-32 x 3/8"L bolts and nuts.
## Step 3
Install the Side Rails and Corner Gussets using #10-32 x 3/8"L bolts in the locations shown below.
{% hint style="info" %}
Ensure that the bottom bolts go through both the Base plate and the Side Rail.
{% endhint %}
## Step 4
Install the Port Covers in the appropriate locations using four #10-32 x 3/8"L bolts and #10-32 nuts.
{% hint style="info" %}
This step can be skipped if the Port Covers are not being used.
{% endhint %}
## Step 5
Install the handles using the included 1/4"-20 x 1"L bolts.
{% hint style="info" %}
The included Tube Nuts need to be pressed into the Handles before the installation process.
{% endhint %}
