# Steps 9-12

## Step 9

Place the assembled Single Upper Kit into the case, ensuring it sits square and aligned. Using a sharpie, mark all required hole locations that will need to be drilled out in the next step.

{% hint style="warning" %}
Do not drill out the holes in this step.
{% endhint %}

<figure><img src="/files/vulOX0PmutDcaUWBrsg1" alt=""><figcaption></figcaption></figure>

## Step 10

Remove the assembly from the case and drill the marked out holes. If any of the holes line up with any metal or handles we recommend not drilling those holes.

## Step 11

Take the assembled Single Upper Kit and set it back in the case in the same location that was used to mark the drilling locations in Step 9. Use #10-32 x 2" L bolts and #10-32 Nuts to bolt everything down. We recommend not tightening everything fully yet.

<figure><img src="/files/HZp8YRF0vTuuKHQzjgnp" alt=""><figcaption></figcaption></figure>

## Step 12

Install the rest of the bin rails and then tighten everything down.

<figure><img src="/files/58Tw0Kxpjxc76JdT9Ico" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.wcproducts.com/welcome/shop-accessories/super-pit/assembly-instructions/single-upper-kit/steps-9-12.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.