# Corner Case Kit

The following sections will have all necessary information for the assembly of the SuperPit Corner Case Kit.

{% hint style="info" %}
The Corner Case Kit does not include the workspace top shown below.
{% endhint %}

<figure><img src="/files/oY6JFp6AUG6PRUXPxDPW" alt="" width="563"><figcaption></figcaption></figure>

## Step 1

{% hint style="info" %}
It is important to first figure out the desired height for your workspace top and mark this height as the bracket placement is based off of this.
{% endhint %}

Install the Corner Brackets onto the case using the #10-32 x 1/2"L Particleboard Screws.

{% tabs %}
{% tab title="Large Corner Bracket" %}
Repeat this for the other Large Corner Bracket.

{% hint style="info" %}
Make sure that the bracket is leveled to prevent any issues.&#x20;
{% endhint %}

<figure><img src="/files/1XdIhc0vsUrBdjwXkvTv" alt="" width="563"><figcaption></figcaption></figure>
{% endtab %}

{% tab title="Small Corner Bracket" %}
Repeat this for the other Small Corner Bracket.

{% hint style="info" %}
Make sure that the bracket is leveled to prevent any issues.&#x20;
{% endhint %}

<figure><img src="/files/J2mqaAi1tspf7Fl9b0S8" alt="" width="563"><figcaption></figcaption></figure>
{% endtab %}
{% endtabs %}

## Step 2

Place you workspace top on the brackets and connect it using the #10-32 x 1/2"L Particleboard Screws.

<figure><img src="/files/W5YZGmVCOsJaXpMwuF5H" alt="" width="563"><figcaption></figcaption></figure>

## Step 3

Lay the Corner Trim parts in their appropriate locations and secure them with the #10-32 x .500"L Particleboard Screws..

{% tabs %}
{% tab title="Trim Layout" %}

<figure><img src="/files/4tFOguriN3to2i30FdDc" alt=""><figcaption></figcaption></figure>
{% endtab %}

{% tab title="Securing the Trim" %}

<figure><img src="/files/L81qvL90gtv01LsUwZfA" alt="" width="563"><figcaption></figcaption></figure>
{% endtab %}
{% endtabs %}


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.wcproducts.com/welcome/shop-accessories/super-pit/assembly-instructions/corner-case-kit.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.