# Tube Fixture Clamp Instruction

Select the desired set of holes that corresponds with the tubing size to be used. Thread the Mitee Bite Clamp all the way down. Begin to unthread the clamp until the tube will slip between the clamp and the wall of the OMIO CNC Tube Fixture. DO NOT loosen more than one full turn. Once all clamps are loosened slide in the part to be machined and tighten all clamps. 

The recommended placement for the clamps is one in the closest hole to the front of the part to be machined as well as one closest to the end of the part to be machined. Depending on the length of the part, a one or two clamps may need to be added evenly spaced in the middle of the part.

{% hint style="info" %}
The Tube Fixture Clamps used are[ (WCP-0372)](https://wcproducts.com/products/omio-cnc-and-accessories).
{% endhint %}

There are two different sets of tapped holes for the Tube Fixture clamps. 

Supported tubing sizes:

* 0.75” 
* 1” 
* 1.25” 
* 1.5” 
* 1.75” 
* 2” 
* 2.25”

<figure><img src="/files/SkiuhSpVsybbXSnQ7VPV" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.wcproducts.com/welcome/shop-accessories/omio-cnc-tube-fixture/assembly-instructions/tube-fixture-clamp-instruction.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.