# Steps 13-16

## Step 13

Loosen the two bolts (circled below in green) on the spindle clamp, allowing the spindle to slide in. Remove the spindle from its box and slide it into the clamp. 

Slide the spindle in the clamp to the desired height and then tighten the two bolts to hold the spindle in place.

{% hint style="info" %}
The height of the spindle is up to the user, but it is recommended to be about 1.5- 2” from the table top to the spindle nose. This can always be adjusted later if it is too low or high. Make the final adjustment once the machine is ready to use.
{% endhint %}

<figure><img src="/files/zkRpP1nH75NLJJuCq2pc" alt="" width="563"><figcaption></figcaption></figure>

## Step 14

Remove the two nuts and rubber plugs from the water inlet and outlet at the top of the spindle.&#x20;

The ports should look like the one circled in yellow when finished.

<figure><img src="/files/iklfavK4qSiDl7qvxGZl" alt="" width="563"><figcaption></figcaption></figure>

## Step 15

Slide the nuts onto the rubber tubes that are ran through the energy chain. Push the rubber hoses onto the barbed fitting and slide the nuts down. Tighten the nuts to secure the hose to the spindle.

{% hint style="info" %}
The hoses can go in either port shown below.
{% endhint %}

<figure><img src="/files/rO9T2dhy7pCcZytTs9qY" alt="" width="563"><figcaption></figcaption></figure>

## Step 16

Plug in the wire for the spindle and use the attached nut to secure the wire. Only hand tighten this.

<figure><img src="/files/dkciFp5IfdM4fLoWmVaJ" alt="" width="450"><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.wcproducts.com/welcome/shop-accessories/omio-cnc-router-x8-usb/assembly-instructions/omio-router-assembly/steps-13-16.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.