# Steps 5-8

## Step 5

Attach the Plastic Side Panel as shown using the #10-32 x 1/2”L bolts. The counter bores in the plastic panel need to face the rivnuts in the tubing. 

Repeat this step for the opposite side of the enclosure.

<figure><img src="/files/UIGnsVkFs8BGdjnNaHgI" alt="" width="563"><figcaption></figcaption></figure>

## Step 6

Attach the Plastic Top Panel as shown using the #10-32 x 1/2”L bolts. The counter bores in the plastic panel need to face the rivnuts in the tubing.&#x20;

Thread the loose bolt from Step 3 into the Plastic Top Panel.

<figure><img src="/files/V5JIeGdPi3x2X8xzbunm" alt="" width="563"><figcaption></figcaption></figure>

## Step 7

Install the Plastic Door into the slots in the Plastic Side Panels. The front of the Side Panels can be flexed out a bit to get the door into place.&#x20;

Repeat for the door on the other side.

<figure><img src="/files/bwIDerC6pZHFqLsCqJru" alt="" width="563"><figcaption></figcaption></figure>

## Step 8

Install the 3D printed bearing guides and bearing in the locations shown below. Do not over tighten the bolts as this will cause the bearings to bind. Tighten enough so that the 3D printed parts are tight against the plastic.&#x20;

Repeat this for all four corners of the Omio CNC Router Enclosure.

{% hint style="info" %}
The threads of the bolts will needed to be sanded down a bit for them to fit into the bearings. This can be accomplished with a hand drill and some sandpaper.
{% endhint %}

<figure><img src="/files/NE6UUcu69mB7AhxOCM0S" alt="" width="563"><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.wcproducts.com/welcome/shop-accessories/omio-cart-and-enclosure/assembly-instructions/omio-cnc-router-enclosure-base/steps-5-8.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.