Rivets are not included with the Bump
3/16" rivets with a .250"–.438" grip length (WCP-0450) are required for the assembly steps below.
Slide the Bump Center Rib into the Bump Body and secure it using 3/16" rivets.
Once the Center Rib is mounted to the Bump Body, install additional rivets in the highlighted locations shown below.
Slide the Bump Socket Bulkheads into place. Secure this using 3/16" Rivets
Once the Socket Bulkheads are mounted to the assembly from Step 1, install additional rivets in the highlighted locations shown below for each.
Last updated 6 months ago
