# Reef Pipe

{% hint style="info" %}
The following steps outline the assembly of the Reef Pipe using U-Bolts. Teams can also weld the pipes together for added strength and durability.
{% endhint %}

## Step 1

Insert the U-Bolt into the Short Reef Pipe and place at the correct height. Tighten nuts on U-bolt until the Short Reef Pipe can no longer twist left/right or slide up/down.

{% hint style="info" %}
The backing plate of the U-bolt will be deformed when the nuts are fully tightened.
{% endhint %}

<figure><img src="https://774995383-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fdysjq0QTnxkvpkq8Q2Du%2Fuploads%2FkzQ2sXf7N2HOXoiJtb6b%2FReef%20Pipe%20Manual%20-%20Step%201.svg?alt=media&#x26;token=6f1e01f7-29f6-4f14-a244-adecd3ab0ea2" alt="" width="563"><figcaption></figcaption></figure>

## Drilling Guide

Slide the Drilling Guide found below onto the assembled Reef Pipe and drill out two holes marked below.&#x20;

{% file src="<https://774995383-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fdysjq0QTnxkvpkq8Q2Du%2Fuploads%2FY1xRg3dUIkoKwX5kLCJ5%2FReef%20Drill%20Guide.STEP?alt=media&token=12c5fb54-762a-4f9c-8b1c-55556b2c3741>" %}

<figure><img src="https://774995383-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fdysjq0QTnxkvpkq8Q2Du%2Fuploads%2F8SWZY2SQhxbMKFUKZ7R4%2FReef%20Pipe%20Manual%20-%20Drilling%20Guide.svg?alt=media&#x26;token=9e2fb5bc-6f89-4089-a034-36ae5e33e3f8" alt="" width="563"><figcaption></figcaption></figure>

### Drilling Orientation

Before drilling out the two marked holes, ensure that the orientations of the Reef Pipe and Drilling Jig are as shown in the image below.

<figure><img src="https://774995383-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fdysjq0QTnxkvpkq8Q2Du%2Fuploads%2FS2FuPJ0iuIdNoG3YsgOY%2FReef%20Pipe%20Manual%20-%20Drilling%20Orientation.svg?alt=media&#x26;token=e9bccc14-a8f8-416d-bd5c-5627f89fe05d" alt="" width="563"><figcaption></figcaption></figure>