# External String

{% hint style="success" %}
Vibra-TITE VC-3 Threadmate ([Vibra-TITE](https://wcproducts.com/products/threadlocker)) is recommended on all bolts that thread into a tapped hole.
{% endhint %}

## Nutstrip Installation

For this mounting example, you will need 2 Aluminum Nutstrips cut to 3”. For one of the nuststrips, drill out the two holes marked in green to #9. 

{% tabs %}
{% tab title="1-1/2" Base Tube" %}
For this mounting example, you will need 2 Aluminum Nutstrips cut to 3”. For one of the nuststrips, drill out the two holes marked in green to #9. Remove the two #10-32 x 3”L bolts indicated in the image below. Drill out the corresponding tapped holes on the Gearbox Plate clearance for #10-32 bolts. Install the nutstrips as shown in the image below using the indicated bolts.

![](/files/q8ixJo5kQTaHgX0xRDgi)
{% endtab %}

{% tab title="2" Base Tube" %}
For this mounting example, you will need 2 Aluminum Nutstrips cut to 3”. For one of the nuststrips, drill out the two holes marked in green to #9. Remove the two #10-32 x 3-1/2”L bolts indicated in the image below. Drill out the corresponding tapped holes on the Gearbox Plate clearance for #10-32 bolts. Install the nutstrips as shown in the image below using the indicated bolts.

![](/files/44DatjO9hMDp5GhmhEGM)
{% endtab %}

{% tab title="2-1/2" Base Tube" %}
For this mounting example, you will need 2 Aluminum Nutstrips cut to 3”. For one of the nuststrips, drill out the two holes marked in green to #9. Remove the two #10-32 x 4”L bolts indicated in the image below. Drill out the corresponding tapped holes on the Gearbox Plate clearance for #10-32 bolts. Install the nutstrips as shown in the image below using the indicated bolts.

![](/files/ckgeETNYeN18cR83KtQq)
{% endtab %}

{% tab title="3" Base Tube" %}
For this mounting example, you will need 2 Aluminum Nutstrips cut to 3”. For one of the nuststrips, drill out the two holes marked in green to #9. Remove the two #10-32 x 4-1/2

”L bolts indicated in the image below. Drill out the corresponding tapped holes on the Gearbox Plate clearance for #10-32 bolts. Install the nutstrips as shown in the image below using the indicated bolts.

![](/files/4HnRzng9yMnOQqM6yJDA)
{% endtab %}
{% endtabs %}

## Mounting Pattern

This hole pattern is for the standard mounting style for the Non-Flipped GreyT Telescopes. The table below shows the dimensions that change between the different base tube sizes.

| **Base Tube Size** | **Dimension A** |
| ------------------ | --------------- |
| 1-12"              | 2-1/2"          |
| 2"                 | 3"              |
| 2-1/2"             | 3-1/2"          |
| 3"                 | 4"              |

![](/files/Sck9JGZ0Lcj2N1YJrJJG)

## Mounting Example

The hole patterns for the individual nutstrips will line up with the scores on the VersaFrame Tube. The distance between the holes will be the same as indicated in the previous section labeled Mounting Pattern. Drill the holes using a #9 drill bit.

Bolt the Flipped GreyT Telescope to the tubing using six #10-32 x 1-1/2"L bolts.

![](/files/ZbFuECfKH4Kdila4Z6QT)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.wcproducts.com/welcome/greyt/greyt-telescope/applications/mounting/external-string.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.