# Colson Wheel

{% hint style="success" %}
Vibra-TITE VC-3 Threadmate ([Vibra-TITE](https://wcproducts.com/products/threadlocker)) is recommended on all bolts that thread into a tapped hole.
{% endhint %}

## Assembly

Insert the 45T Bevel Gear by either tapping it in with a dead blow hammer or using an arbor press.

{% hint style="info" %}
Be sure to align the bolt holes in the Colson Swerve X2 Wheel with the tapped holes in the 45T Bevel Gear.
{% endhint %}

{% hint style="warning" %}
Ensure that the 45T Bevel Gear is fully seated before installation. Failure to do so will not allow the wheel to spin smoothly.
{% endhint %}

<figure><img src="https://4022448544-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fv3U1blZmAL1arpmYDPqt%2Fuploads%2FWhKN5Wvwwze5w2IPINPA%2FSwerve%20X2%20-%20Colson%20Wheel%20Assembly.svg?alt=media&#x26;token=52fdddd7-6433-4959-8813-3015e7ab883b" alt="" width="563"><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.wcproducts.com/welcome/gearboxes/wcp-swerve-x2/assembly-instructions/wheel-installation/colson-wheel.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.