> For the complete documentation index, see [llms.txt](https://docs.wcproducts.com/welcome/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.wcproducts.com/welcome/gearboxes/wcp-swerve-x/misc/other-configurations/getting-started/flipped-gears-below/step-13-14.md).

# Step 13-14

{% hint style="success" %}
Vibra-TITE VC-3 Threadmate ([Vibra-TITE](https://www.vibra-tite.com/threadlockers/removable-reusable-threadlockers/vibra-tite-vc-3-threadmate/?gad_source=1\&gad_campaignid=89842748\&gbraid=0AAAAAD2P3YRFs-3Kj4YTX9A4qtZWYdqGQ\&gclid=EAIaIQobChMI0JSks4upjQMVcNPCBB1_ghB9EAAYASAAEgJQp_D_BwE)) is recommended on all bolts that thread into a tapped hole.
{% endhint %}

## Step 13

Insert the 45T Bevel Gear by either tapping it in with a dead blow hammer or using an arbor press.

{% hint style="warning" %}
Be sure to align the bolt holes in the Aluminum Swerve Wheel with the tapped holes in the 45T Bevel Gear.
{% endhint %}

The Wheel Drive Axle is symmetric. The orientation it is assembled in does not matter.

{% hint style="info" %}
The locations of the bolts are marked out in green in the image below.
{% endhint %}

<figure><img src="https://3958382810-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FND1U7zTGCCQQKREZ5H8s%2Fuploads%2FVtCLgOMJCH10kBGaBbe4%2FWheel%20Assembly.svg?alt=media&amp;token=c1662359-4dbd-4ac8-a1c8-b2e884310a78" alt=""><figcaption></figcaption></figure>

{% hint style="info" %}
The 1/2" ID x 1 1/8" OD Radial Bearing that is pressed directly into the wheel and not the bevel gear must sit .034" deeper than flush. If the bearing is not pressed all the way into the wheel, the bevel gears will not mesh properly.

The  1/2" ID x 1 1/8" OD Radial Bearing will come pressed into the wheel.
{% endhint %}

<figure><img src="https://3958382810-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FND1U7zTGCCQQKREZ5H8s%2Fuploads%2Fo4APyW1SSxMyBbDYEuHF%2Fwheel%20assembly%202.svg?alt=media&amp;token=e393ba6f-fcf2-465f-91cd-8c5c7aafbf69" alt=""><figcaption></figcaption></figure>

## Step 14

When installing the Wheel Assembly, be sure the 45T Bevel Gear and 15T Bevel Gear are on the same side.

{% hint style="info" %}
It is easier to install the tread on the wheel before installing the wheel in the module.
{% endhint %}

{% hint style="info" %}
While the image below may show the Non-Flipped configuration, this step is the same for all Swerve X configurations.
{% endhint %}

<figure><img src="https://3958382810-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FND1U7zTGCCQQKREZ5H8s%2Fuploads%2FIiYqcroWxLv2QhBEnxkG%2FGears%20Below%20(Step%2014).svg?alt=media&amp;token=343f7dfa-1e52-4e6d-8dac-dfe71906041a" alt="" width="563"><figcaption></figcaption></figure>

## Corner Mounting

For more instructions regarding mounting the Corner Mount modules, see the [Corner Mounting](/welcome/gearboxes/wcp-swerve-x/applications/corner-mounting.md) section.

<figure><img src="https://3958382810-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FND1U7zTGCCQQKREZ5H8s%2Fuploads%2FDeyPRFHcPnMPEVaGtiEW%2FGears%20Below%20Corner%20Mounting.svg?alt=media&amp;token=bf169cf9-2ae5-41f6-b732-0f3f49e20f25" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.wcproducts.com/welcome/gearboxes/wcp-swerve-x/misc/other-configurations/getting-started/flipped-gears-below/step-13-14.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.