Ctrlk
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Getting Started

Assembly Prep

Refer back to the Individual Components page and ensure that all necessary parts are located before starting assembly steps.

Tools required for assembly:

These tools are required for the assembly of the WCP Swerve X

  • Snap ring pliers (For 1/2" and 3/8" snap rings)

  • Allen keys

    • 3/32"

    • 1/8"

    • 5/32"

  • 7/16" Wrench

Optional tools that may be needed:

  • Arbor press

  • Deadblow hammer

Vibra-TITE VC-3 Threadmate (Vibra-TITE) is recommended on all bolts that thread into a tapped hole.

Apply Lucas Red "N" Tacky grease to all gears after final assembly to ensure smooth operation and reduce wear during use.

Cover

Standard

Module Assembly Instructions

Cover

Flipped (Gears Below), Gear Cartridge

Module Assembly Instructions

Cover

Wheel Tread

Cutting Instructions

PreviousMaintenanceNextStandard

Last updated