# Wiring & Connectors ## Wire Product Page ### Silicone Wire Flexible electrical wire is ideal for creating clean, efficient wiring runs on your robot. Its pliability makes routing through tight spaces easy, while maintaining strong conductivity and reliable connections for motors, sensors, and control systems. * 600+ strands of high performance copper wire * Flexible & durable casing * 25 ft. length * Bonded Wire available in 8 AWG, 10 AWG, 12 AWG, 14 AWG, 18 and 22 AWG * 12AWG Unbonded Wire available in Red, Black, and White

Thin Insulation Wire is ideal for clean, compact electrical routing in tight robot assemblies. Its durable, low-profile insulation allows power to be routed through crowded mechanisms without adding unnecessary bulk. Well-suited for long power runs or turreting systems, it helps keep wiring organized, reliable, and competition-ready.

| AWG | OD Nominal | Color | | ----- | ---------- | ----------------- | | 10AWG | 0.14" | Red, Black, White | | 12AWG | 0.12" | Red, Black, White | | 14AWG | 0.10" | Red, Black, White | | 18AWG | 0.07" | Red, Black | ### Battery Wire ### Battery Wire This flexible electrical wire is ideal for delivering reliable power from the battery to your robot’s control system. Its high strand count and durable insulation make it easy to route through tight spaces while withstanding the demands of competition use. Perfect for clean, efficient, and dependable power wiring. * 600+ strands of high performance copper wire * Flexible & durable casing * 10 ft. length * Unbonded Battery Wire available in the following sizes: * 2 AWG, 4 AWG, and 6 AWG

### CAN Wire CAN wire is a vital part of any CAN system, and it must be chosen and installed with care to guarantee dependable communication. Such as that of the traditional Daisy Chaining format commonly used by FRC. **Available In:** * CAN Wire (25-feet) * Black Jacketed CAN Wire (25-feet) * White Jacketed CAN Wire (25ft) * Gray Jacketed CAN Wire (25ft)

## Ethernet Cables Product Page All robots need ethernet cables to connect to electronics like the radio, Limelight, Rio, and more. WCP now has these slim low profile ethernet cables, from half a foot, up to 15 feet. When it comes to ethernet cables. we got you covered **Lengths Available:** * 0.5', 1', 1.5', 2', 3', 4', 5', 6', 7', 8', 9', 10', 12.5', 15ft

## Wire Splicing ConnectorsProduct Page Manual ### Wire Nuts The Wire Nuts allow for faster and more reliable connections to be made between smaller gauge wires. The compact and robust design means that you never have to worry about your connectors taking up too much space or coming unplugged. #### Standard Wire Nuts Standard wire nuts are a simple and reliable solution for splicing between 2 to 5 wires. They provide a secure, insulated connection and are ideal for quick electrical repairs or modifications in both prototyping and competition environments.

| Wire Size | 0.08-4.0mm² or 28-12AWG | | ------------- | ----------------------- | | Rated Voltage | 400V | | Rated Current | 32A | | Strip Length | 10mm or 3/8” | #### Multiple Output Wire Lever Nuts Multiple Output Wire Lever Nuts are a convenient alternative to standard wire nuts, offering an easy way to splice multiple wires together. Unlike traditional wire nuts, these feature a dedicated input side, making it easier to organize wiring and clearly identify the input connection. They’re perfect for clean, efficient electrical setups in robotics and other electronics projects.

| Wire Size | 0.08-4.0mm² or 28-12AWG | | ------------- | ----------------------- | | Rated Voltage | 400V | | Rated Current | 32A | | Strip Length | 10mm or 3/8” | #### Inline Wire Lever Nuts Inline Wire Lever Nuts are ideal for splicing two sets of wires, such as CAN lines, while maintaining clear separation and organization. The color-coded levers make it easy to distinguish between connections, helping to reduce wiring errors and streamline troubleshooting in complex electrical systems.

| Wire Size | 0.08-4.0mm² or 28-12AWG | | ------------- | ----------------------- | | Rated Voltage | 250V/400V | | Rated Current | 32A | | Strip Length | 10mm or 3/8” | ### Solder Seal Connectors Solder seal connectors are electrical connectors that use solder to create a secure and long-lasting seal between the connector and the wires. This makes them ideal for applications where the wires are exposed to harsh environments, such as industrial settings.

## Wire Contact & Connectors Product Page Whether you are building your first drivetrain or wiring up a complex shooter, these connectors are tough enough to handle hits and fast turns on the field. We have 45A and SB50 connectors and contacts available.

## iWiss Tools Product Page WestCoast Products is proud to partner with iWISS to bring high-quality electrical tools to the FRC community, supporting reliable wiring. ### Crimpers Electrical crimpers are essential for every control system. Whether you're securing terminal connections, delivering power through PowerPole connectors, or crimping ferrules for your electronics, WestCoast Products has you covered. * iWISS Non-Insulated Terminal Crimper (22-10 AWG) * iWISS Ratcheting PowerPole Crimper (15, 30 & 45 Amp Contacts) * iWISS Ferule Crimping Tool (23-10 AWG)

### Wire Strippers & Cutters Wire strippers and cutters are indispensable tools for every electrical project. Whether you're stripping insulation for secure wire connections, cutting wires to precise lengths, or preparing cables for installation, WestCoast Products has you covered. * iWISS Diagonal Flush Cutters * iWISS Automatic Wire Stripper/Wire Cutter (32-7 AWG) * iWISS Pull Style Wire Stripper (22-10 AWG)

### Battery Tools The iWISS Battery Lug Crimper & Cutter equips teams with the necessary tools to create their own battery connections. Making one of the most important connections on a robot control system a breeze.

--- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://docs.wcproducts.com/welcome/frc-build-system/electronics-and-pneumatics/wiring-and-connectors.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.